Arnold OEM-390-995 Snow Thrower Cover For All 2-Stage Snow Throwers

If you want your outdoor power equipment to last longer and do more � you want Arnold parts accessories and attachments. From basic maintenance to major innovations Arnold has everything you need to keep equipment running the way it should � and giving you the most it can � season after season. With Arnold you can be certain of a correct fit and the finest design materials and construction in every product. Plus we�re constantly developing new products to help you do even more.

• Replacement Part

More detail ...

Murray 762222MA Snow Thrower Chute Assembly

Model Numbers: Listed below are some models that this part is commonly used in. Please note that model numbers often include additional characters at the front of the model number that are used to identify a supplier. For example: Model 12345 for a part may appear with additional numbers and could be expressed as 123.12345 or 12312345. Please keep this in mind as you make your decision.
536881851;
536881800;
53688185;
536887992;
536.88799;
536887990;
53688180;
536881951;
536881550;
53688185100;
536881850;
536.887993;
53688195;
536.88725;
53688180000;
536.887995;
536.887250;
536.887996;
53688155;
536.887251;
53688185000;
536881950;
536881750;
536.887994;
536881651.

• Replaces Murray part numbers 762222 325864 325847 76221MA 76221 325847MA 585414 307672 and more

More detail ...

Easy Heat RS-2 Automatic Roof De-Icing Cable Control

Control expense and energy use in electric roof cable protection automatically with Roof Sentry (RS-2). The RS-2 requires two conditions to be present before it energizes roof deicing cable: cold temperatures (ON 38-degree F; OFF 48-degree F) and the presence of runoff water from the roof in contact with its sensor wire. If only one of the conditions exists the control will not energize the cable.

• 1200 Watt capacity at 120 VAC one per cable


• State of the art electronic sensor


• Weather resistant enclosure


• Installs quickly and easily


• Made in the USA

More detail ...

Snow Joe Ultra 622U1 19-Inch 13-Amp Electric Snow Thrower

Finally! An easy to use machine that can remove heavier snow. Responding to the need for an easy-to-use machine that could tackle heavier snowfall on large driveways and walkways Snow Joe developed the Snow Joe 622 a larger electric snow thrower that delivers the power of a gas machine with the convenience of an electric unit. Driven by a 13 amp motor the Snow Joe Ultra moves up to 800 pounds of snow per minute. Its durable 4 blade rotor constructed of heavy grade steel cuts a full 19" wide and 11" deep with each pass clearing 2150 square feet per hour.

In addition to its hard-working plowing capacity the Snow Joe Ultra features an adjustable discharge chute that rotates a complete 180 degrees to provide full control over the snow discharge direction. The chute deflector can also be adjusted to control the height of the snow stream. Easy-glide pivot wheels make the Snow Joe Ultra easy to turn and maneuver on each pass. The scraper blade at the base of the unit efficiently scrapes the snow clear to the pavement.

The Snow Joe Ultra 622 is powered electrically making it effortless to start and maintain. No gas oil or tune-ups are necessary. The unit is ETL-approved and carries a full two year warranty.

• Snow Joe Ultra 622 snow blower with instant start and easy push button switch is always effortless to start and maintain


• Snow Joe Ultra cuts up to 19 inches wide and 11 inches deep in one pass


• Scraper clears to the pavement and 13 amp motor moves up to 800 pounds of snow per minute


• Chute deflector controls height of snow stream


• ETL-approved; 2-year warranty

More detail ...